The anti-condensation paint addresses mold sources and prevents condensation from piling up on the wall. Anti-Condensation Paint provides an added layer of insulation to the wall which puts a stop to building up condensation and developing molds.

  • Finish: Rough, scrub able
  • Immune to rain, to avoid molding
  • Leave as is or over-paint
  • In 1 to 2 hours, touch dry
  • Ready to paint in 4 hours

Anti-condensation paint has acquired prominence with homeowners over the past few years. The paint is partially insulating the wall to increase surface temperature, and the paint can even contain a fungicide to avoid the germination of mold formation. This paint is the best choice if you are looking to prevent future discolouration and staining.

High moisture content of the air condensing on cold surfaces creates condensation. Lots of stuff like running a bath, drying your clothes, or even just making a cup of tea will cause high moisture in the air! However, in any form of property, whether it is a floor, apartment, or home, new or old, moisture build-up may occur.

Problems with Condensation

The level of humidity in the air is called Relative Humidity and this will create complications as the property cools down when the humidity may tend to condense and accumulate on cold surfaces.

Problems with condensation are more common than ever, as the living conditions have increased and improved, making homes more airtight. Insulation, double glazing, and proofing of draught result in properties suffering from inadequate air circulation and trapping humidity.

The key reason condensation should be regulated and avoided is because it may produce an unsafe breathing atmosphere where black mold may flourish without proper ventilation. If you are someone who looks after your home 's interior, condensation can be highly distressing as it can affect your lighting, ruin cloth and furniture, and create an unpleasant smell caused by humidity in your home. This is why you must use the Thermilate Technologies InsOpaint anti-condensation paint.

One may define condensation as a seasonal problem. Problems also occur as the temperatures get cooler during the winter months. In certain cases, problems with condensation can vanish during the summer. Even the worst cases of extreme condensation of moisture will happen all year round.

Main Reason for Condensation

The main reason condensation happens during the winter months is that house ventilation is typically poor, and more humidity is produced. We 're most likely to have the doors and windows locked throughout the winter months. This will lead certain households to suffer from condensation for some time, causing a build-up of moisture vapor within properties.

If the property results from a property defect such as blocked wall cavities resulting in cold wall surfaces created by cavity bridging, then this may lead to extreme condensation and mold impacting these areas.

Construction requirements have significantly changed over the years, and buildings become airtight with less draughts. Proper ventilation in your house decreases the high relative humidity to acceptable levels. Making sure ventilation does not have high moisture content inside your home may increase the odds of preventing condensation. Proper heating, insulation, and ventilation is needed to keep the moisture in your home at the right amount.

It is also necessary to ensure that those that work in the property do not produce undue moisture while cooking, such as not using the extractor fans. Few may use moist dehumidifiers, so it is important to note that you do not mess with the root of the issue by using a dehumidifier.

As a homeowner, there are many precautions you should take to enhance the air quality inside your home and avoid condensation. You should try to normalize your home's level of relative humidity (RH) to between 40 per cent and 60 per cent air humidity. RH can be managed by ensuring adequate heating, cooling, and insulation in your property along with reducing excess moisture production in the air. This condition is easy to achieve if you have applied anti-condensation paint.

Experts of ventilation recommend that those living within a property dry their outside clothing. This prohibits additional moisture from leaking into the property's air. It is advised that you open the doors or windows in these rooms if you need to dry the clothes indoors.

How you can reduce moisture level inside your house?

There are small things you can do to reduce the levels of moisture inside your property every day. Except when preparing, making a cup of tea, running the bath or tub, make sure the doors of these rooms are kept locked. This will prevent the condensation of steam from leaking into warmer spaces.

Another measure that you should do while cooking is to make sure you cover your pans with a lid, as this would prevent moisture streaming into the kitchen. It is also recommended that when you are cooking you Should have a window open, or whether your home has an extractor fan to turn it on.

A top recommendation on condensation reduction is that when you finish cooking you do not turn off the extractor fan or shut the window – continue and keep them open for around 15-20 minutes afterwards. This will lighten the air within the room.

Even the above procedure can be extended while you operate the bathroom tub or taps. Be sure you turn on the extractor fan in your homes or open a window inside the toilet. This would reduce the high humidity of a cold space that is produced by warm water.