Water-Proofing Paint: 7 Ways To Water Proof Your Exterior Walls | PaintOutlet.co.uk

This seven step guide will help you waterproof your exterior walls effectively and prevent any further damages linked with damp walls. 

  1. When looking for ways to waterproof your walls, the first step is to find the cracks and places from where the water seeps in. It can be cracks in the bricks or a leaking water pipe. A detailed inspection of the wall is a pre-requisite of other steps to waterproof your wall.
  2. Rains often lead to gutters being flooded. This will not only lead to overflowing of water, but the wooden roof and walls soak up the water too. It weakens the integrity of the structure and may lead to other wall issues, i.e. mould, leaks, etc. Cleaning the gutters twice a year will do the job. It can be more frequent depending upon the rain in your area.
  3. Selecting the right water-proofer for your walls is crucial. The Concrete waterproofing coating is suitable for use on any surface, i.e. concrete and masonry. You can also use it on painted walls. Silicate concrete sealer is used as a reacting agent for walls. It combines with masonry and cement to form a waterproof layer. It cannot be used on painted walls. Waterproof Paint is also a good alternative for waterproofing your walls. It’s pretty much the same as acrylic Paint.
  4. Plastering your walls is an excellent way to waterproof them. However, adding a waterproofing additive in the plaster would make waterproofing more effective.
  5. If there are potential cracks in your wall. Repair the cracks with filler. Be careful in this process; let the filler dry and use sandpaper at the end to make it all even. Now you can apply any paint that you want on your wall.
  6. Applying waterproofer with a roller is also a right approach. Go for multiple coats and let them dry. The layer should be thick enough to prevent any water seepage.
  7. Testing is one of the essential parts of waterproofing your exterior walls. Spray water on your waterproofed wall and use a sensor to find out if the wall soaks up any water. If you find any zones of penetration, repeat the first step and take the required measures.

If you liked this video, share your views in the comments section. Don’t forget to like and subscribe our channel.

See ya!

Waterproofing walls, Waterproof paint

  1. When looking for ways to waterproof your walls, the first step is to find the cracks and places from where the water seeps in. It can be cracks in the bricks or a leaking water pipe. A detailed inspection of the wall is a pre-requisite of other steps to waterproof your wall.
  2. Rains often lead to gutters being flooded. This will not only lead to overflowing of water, but the wooden roof and walls soak up the water too. It weakens the integrity of the structure and may lead to other wall issues, i.e. mould, leaks, etc. Cleaning the gutters twice a year will do the job. It can be more frequent depending upon the rain in your area.
  3. Selecting the right water-proofer for your walls is crucial. The Concrete waterproofing coating is suitable for use on any surface, i.e. concrete and masonry. You can also use it on painted walls.

 Silicate concrete sealer is used as a reacting agent for walls. It combines with masonry and cement to form a waterproof layer. It cannot be used on painted walls. Waterproof Paint is also a good alternative for waterproofing your walls. It’s pretty much the same as acrylic Paint.

  1. Plastering your walls is an excellent way to waterproof them. However, adding a waterproofing additive in the plaster would make waterproofing more effective.
  2. If there are potential cracks in your wall. Repair the cracks with filler. Be careful in this process; let the filler dry and use sandpaper at the end to make it all even. Now you can apply any paint that you want on your wall.
  3. Applying waterproofer with a roller is also a right approach. Go for multiple coats and let them dry. The layer should be thick enough to prevent any water seepage.
  4. Testing is one of the essential parts of waterproofing your exterior walls. Spray water on your waterproofed wall and use a sensor to find out if the wall soaks up any water. If you find any zones of penetration, repeat the first step and take the required measures.