The best technique to apply your Roof paint if you’re an amateur! |

It can be tempting to take a DIY approach to roof painting.

It seems like a simple job, but as an amateur, you may overlook many problems. Your roof will be a new colour when you're done, but is that all there is to roof painting? Hiring a professional roof painter may be a wise home improvement but if you just want to, dare to do it yourself! 

Things to think about before a DIY roof painting

Arguably, if your roof is a single story roof and the slope is not too steep, DIY painting can seem like a good idea. 

The first thing in the list is to clean the roof and to look for areas that need repairing. 

Before applying the paint, we must fix any damage to the ceiling. Cracks and dampness are very common and there are many products on the market to fix these imperfections, also the paint to be applied should be prepared in a large, deep container so that it can be removed as easily as possible. With regard to the paint chosen, we should know that there are many types, so we suggest you can go to our shop and choose among all our Roof Paints. 

Painting a roof requires a step-by-step approach and is not as simple as it might appear. Roofs are best painted with spray equipment, but there’s no problem if you want to use a roller (It will just take more time). 

An amateur will be working at heights and will have to concentrate on their work, so be aware of it! 

Roof painters know what they are doing and know how to work safely on roofs.

Now, some of the steps you should follow are: 

1. Start painting on the cornices. Use a brush to go over the whole perimeter of the angle between the ceiling and the walls, in the area where the roller cannot be applied.

2. Draw some imaginary squares covering the whole surface of the ceiling to be painted.

3. Start with the roller from the corner of the door wall towards the window. Move towards the area where the light enters and avoid returning to an already painted surface.

4. Allow this first layer to dry. Once dry, apply a second coat of paint by crossing the direction of the roller.

5. To finish the process, smooth the painted surface in the same direction as the first layer, towards the light, without adding paint to the roller.

Maybe it can be hard at first as an amateur, because of the details, but we’re sure that if you push your limits you can achieve whatever you want!

If you like this content don’t forget to like and comment what was your favorite part! Visit for more products information!