PREMIUM & FAST SERVICE
Shipping & Returns
Be the first to know about New product launches, Free Product samples, New reward points store and much much more...
Fast & Free Technical Phone Advise 0330 330 9824 MON- FRI 9-4PM
Shipping & Returns
Find retail locations
For orders above £50
For All Your Questions
Products Made Fresh On Order 🏭
Free Shipping Over £50 📦
Climate Positive Products 🌎
Scientifically Tested & Proven Products 🧪
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
HQC Anti Damp Paint is a high-performance solution developed to create a breathable, obliterating membrane that seals and permanently stops the reappearance of damp, water, and other household stains. The special feature of micro-porous formulation allows trapped moisture to evaporate to prevent paint flaking or wallpaper peelings. It is highly suitable for applying to both dry and damp walls and ceilings. HQC Anti Damp Paint can be applied as a basic waterproofing barrier on a newly build basement before the installation of a ground drain system. Sufficient coverage can be accomplished in just one coat, ensuring the surface is prepared for application.
The new HQC Anti Damp Paint is a high-performance solution developed to create a breathable, obliterating membrane that seals and permanently stops the reappearance of damp, water, and other household stains. It is your go-to paint if you have damp issues on your walls.
Colours available in:
Black, White, Brown, Leaf Brown, Light Grey, Classic Grey, Dove Grey, Duck Egg, Light Blue, Pale Blue, Marina Blue, Ivory, BabyA Pink, Racing Green, Sage Green, Terracotta, Sandstone, Light Beige, Bagels, Magnolia, Red Brick/ Rich Red/ Rustic Red, Pine Forest/ The Garden/ Waterfall
This product approximately covers 12-16 per 1 coat, 6 - 8 per litre per 2 coats. Depending on the colour and porosity of the surface.
Can be used in all homes and commercial properties including Residential, Spas, Gyms, Schools, Universities, Hospitals and many more.
Touch Dry: 2 h
Re-coatable: 4 h
IMPORTANT: Ensure you have enough paint in one batch, if you are using more than one container please ensure you mix the two containers in a single bucket to ensure colour consistency. (Due to batch variations)
Depending on the surface and the colour being painted 1 or more coats may be required. Allow 4- 6 hours in-between coats. The product is easy to apply - brush, roller or spray.
Whether you’re painting your Interior, Exterior or furniture. The surface preparation remains the same.
To get the best adhesion & results from HQC Paint, you need to get your surface ready in 3 Short Steps.
If your painting on pre-painted surfaces, Ensure your surfaces are dry, & have been cleaned and if there's any rough patches surfaces must be repaired and sanded.
(If your painting on fresh plaster please apply a base-coat or a primer before painting, thinning this paint with 50% water will allow a thin layer to be used as a base/mist coat) (use primer on wood & metal surfaces.)
Ensure your wall cracks are filled and repaired to minimise risk of damp.
Ensure your wall or surface is fully dried, dust-free, and condensation-free with no flaking paints.
(NOTE: MOULD, Condensation and Damp problems only grow back when the root issue of the problem is not solved. Mainly caused by bad ventilation & water ingress)
Heres Quick, Full guide for homeowners & painters like you on how prepare your surfaces like a pro, in no time… Click Here
https://www.paintoutlet.co.uk/pages/surface-preparation
Once your surface is prepared, you're ready to paint!
Very Easy-to-Apply: You can use Brush, Roller or Airless Sprayer on all Interior and Exterior walls & rooms, including all concrete surfaces such as slabs, block paving, tarmac and all brick and masonry surfaces.
(NOTE: All surfaces must be clean, dry and free from grease/dirt before painting.)
Use primer if required and this should be used on most unpainted surfaces. OR If you are going to paint on absorbent surfaces like fresh plaster, bricks, stone and or concrete surfaces, you can make a mist coat by mixing your first coat with 50% water.
(This product is also suitable to be used on wood (wood surfaces must be sanded for a smooth finish) & metal surfaces and Furniture with a good quality primer OR HQC universal primer.)
Free delivery over £50 to members
Sign up for free shipping, Discount and product aamples
Satisfied or refunded
30 day money-back guarantee
Fully Experienced Support Team
Call 0330 330 9824 Monday to Friday during 9AM - 5PM
Secure payments
Check our securely with Paypal, Apple Pay And other major merchants
Item | Price | Qty | Total | |
---|---|---|---|---|
Subtotal |
£0.00 |
|||
Shipping | ||||
Total |