PREMIUM & FAST SERVICE
Shipping & Returns
Fast & Free Technical Phone Advise 0330 330 9824 MON- FRI 9-4PM
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
HQC Vinyl Matt Emulsion Paint is one of the top products – it’s matt, environmentally-friendly, and completely wipeable. The product is great for painting walls and ceilings, but also can be used on woodwork and radiators (if HQC Universal Primer is used before painting).
Colours available in:
Black, White, Brown, Leaf Brown, Light Grey, Classic Grey, Dove Grey, Duck Egg, Light Blue, Pale Blue, Marina Blue, Ivory, Baby Pink, Racing Green, Sage Green, Terracotta, Sandstone, Light Beige, Bagels, Magnolia, Red Brick/ Rich Red/ Rustic Red, Pine Forest/ The Garden/ Waterfall
This product approximately covers 12-16 per 1 coat, 6 - 8 per litre per 2 coats. Depending on the colour and porosity of the surface.
Can be used in all homes and commercial properties including Residential, Spas, Gyms, Schools, Universities, Hospitals and many more.
Touch Dry: 2 h
Re-coatable: 4 h
IMPORTANT: Ensure you have enough paint in one batch, if you are using more than one container please ensure you mix the two containers in a single bucket to ensure colour consistency. (Due to batch variations)
Depending on the surface and the colour being painted 1 or more coats may be required. Allow 4- 6 hours in-between coats. The product is easy to apply - brush, roller or spray.
Whether you’re painting your Interior, Exterior or furniture. The surface preparation remains the same.
To get the best adhesion & results from HQC Paint, you need to get your surface ready in 3 Short Steps.
If your painting on pre-painted surfaces, Ensure your surfaces are dry, & have been cleaned and if there's any rough patches surfaces must be repaired and sanded.
(If your painting on fresh plaster please apply a base-coat or a primer before painting, thinning this paint with 50% water will allow a thin layer to be used as a base/mist coat) (use primer on wood & metal surfaces.)
Ensure your wall cracks are filled and repaired to minimise risk of damp.
Ensure your wall or surface is fully dried, dust-free, and condensation-free with no flaking paints.
(NOTE: MOULD, Condensation and Damp problems only grow back when the root issue of the problem is not solved. Mainly caused by bad ventilation & water ingress)
Heres Quick, Full guide for homeowners & painters like you on how prepare your surfaces like a pro, in no time… Click Here
Once your surface is prepared, you're ready to paint!
Very Easy-to-Apply: You can use Brush, Roller or Airless Sprayer on all Interior and Exterior walls & rooms, including all concrete surfaces such as slabs, block paving, tarmac and all brick and masonry surfaces.
(NOTE: All surfaces must be clean, dry and free from grease/dirt before painting.)
Use primer if required and this should be used on most unpainted surfaces. OR If you are going to paint on absorbent surfaces like fresh plaster, bricks, stone and or concrete surfaces, you can make a mist coat by mixing your first coat with 50% water.
(This product is also suitable to be used on wood (wood surfaces must be sanded for a smooth finish) & metal surfaces and Furniture with a good quality primer OR HQC universal primer.)
Colour Range: 32
Compositions: Water Based
Pack Sizes: 0.5 / 1/ 2.5 / 5L
Touch Dry: 2 h
Recoatable: 4 h
Application: Brush / Roller / Spray
Drying Time: 24h
Suitable for: Interior walls and ceilings