TOP BENEFITS: 🌟
- High quality Kitchen & Bathroom Paint that insulates your walls
- Reduces Heat loss insulating paint
- Can be used as wall paint as well as ceiling paint
- Provided thermal insulation reduces heating bills
- Lowest cost wall & ceiling thermal insulation
- Saves you energy and money
- Water based acrylic paint, therefore eco-friendly
- Reduces severe condensation problems
- Mould resistant bathroom paint
- Grease resistant kitchen paint
- Helps prevent unsightly toxic mould
- Easy to use for all painters and decorators
- Scientifically tested & proven in top laboratories worldwide & government bodies
TOP FEATURES: ✅
-
All-In-One Premium Paint Protection For Kitchen & Bathrooms: Easy to apply by any new painter. Say goodbye to those cracks, chips, fading colour or peels; the perfect choice whether you're painting the ceiling or walls.
-
Genuine Energy Saving Paint: By decorating with InsOpaint, A thermal barrier is formed on your walls which prevents heat loss and from wasting time being absorbed into your walls. InsOpaints Thermal barrier reflects heat back into the room ultimately helping you heat your rooms faster and lower your thermostat.
-
It's Made To Be Hardwearing, Providing Extreme Durability Against The Harshest Conditions: This paint is extremely resistant to wear and tear. Helps prevent mould and bacteria in moisture conditions and is a good grease protector.
-
Choose From The Trendiest Colours In Season: Kitchens and bathrooms are one of the most used rooms in any property. Adding elegance, expression and colour shouldn't let you compromise the quality of your living spaces. Simply choose your desired colour from our selection and let the paint do the talking.
-
Fully-Washable & Wipeable: Made to be extremely tough against stain, moisture and grease. Unlike cheaper paints that deteriorate easily, This water-based with outstanding breathability, makes it effortless to simply “wipe and refresh” your walls and get a fresher look at all times without having to repaint occasionally.
Whats the Coverage?
InsOpaint Kitchen & Bathroom Paint approximately covers 12-16 per 1 coat, 6 - 8 per litre per 2 coats. Depending on the colour and porosity of the surface.
Can be used in all homes and commercial properties including Residential, Spas, Gyms, Schools, Universities, Hospitals and many more.
Drying Time: (Note: drying times, depends on the climate conditions when painting)
Touch Dry: 2 h
Re-coatable: 4 h
IMPORTANT: Ensure you have enough paint in one batch, if you are using more than one container please ensure you mix the two containers in a single bucket to ensure colour consistency. (Due to batch variations)
Depending on the surface and the colour being painted 1 or more coats may be required. Allow 4- 6 hours in-between coats. The product is easy to apply - brush, roller or spray.
Reading the following information below will help you understand how to paint & Prepare all surfaces like a pro.
SURFACE PREPARATION - BEFORE APPLICATION: 🏡
Whether you’re painting your Interior, Exterior or furniture. The surface preparation remains the same.
To get the best adhesion & results from InsOPaint, you need to get your surface ready in 3 Short Steps.
It's critical to achieve perfect results.
Step 1):
If your painting on pre-painted surfaces, Ensure your surfaces are dry, & have been cleaned and if there's any rough patches surfaces must be repaired and sanded.
(If your painting on fresh plaster please apply a base-coat or a primer before painting, thinning this paint with 50% water will allow a thin layer to be used as a base/mist coat) (use primer on wood & metal surfaces.)
Step 2):
Ensure your wall cracks are filled and repaired to minimise risk of damp.
Step 3):
Ensure your wall or surface is fully dried, dust-free, and condensation-free with no flaking paints.
(NOTE: MOULD, Condensation and Damp problems only grow back when the root issue of the problem is not solved. Mainly caused by bad ventilation & water ingress)
Heres Quick, Full guide for homeowners & painters like you on how prepare your surfaces like a pro, in no time… Click Here
https://www.paintoutlet.co.uk/pages/surface-preparation
HOW TO USE YOUR PAINT: 🎨
Once your surface is prepared, you're ready to paint!
Very Easy-to-Apply: You can use Brush, Roller or Airless Sprayer on all Interior and Exterior walls & rooms, including all concrete surfaces such as slabs, block paving, tarmac and all brick and masonry surfaces.
(NOTE: All surfaces must be clean, dry and free from grease/dirt before painting.)
Common Questions:
Should i use a primer before painting?
Use primer if required and this should be used on most unpainted surfaces. OR If you are going to paint on absorbent surfaces like fresh plaster, bricks, stone and or concrete surfaces, you can make a mist coat by mixing your first coat with 50% water.
Can i use this on Wood or Metal?
(This product is also suitable to be used on wood (wood surfaces must be sanded for a smooth finish) & metal surfaces and Furniture with a good quality primer OR HQC universal primer.)