PRO – Exterior Wall Coating (S-Flex)

 BUY NOW SAFETY DATA SPECIFICATION DATA
Colour Range 12 Colours
Compositions Water Based
Pack Sizes 20L
Touch Dry 1 – 2 h
Recoatable 2 – 4 h
Coverage 4 -6 m²/l
Finish Matt
VOC Low

Description

PRO S-FLEX is the latest supperior flexible insulating and 100% acrylic waterproofing smooth finish wall coating from Thermilate. Guaranteed for 15 Years. The superior elasticity within the coating protects from flaking, blistering and tearing while concealing small gaps and cracks in walls. S-Flex is made with micro porous structures to ensure unrivaled breathability and prevent condensation build-up and prevent water vapour entry from outside.

WHITE CORNISH CREAM BEIGE MAGNOLIA OYSTER BUTTERMILK

 

LIGHT BLUE LIGHT GREEN ROSE TERRACOTTA SANDSTONE RED BRICK
Benefits
  • Guarantee properties remain bone-dry.
  • REDUCE heat loss through walls.
  • SAVE ENERGY and SAVE MONEY on energy bills.
  • BE RESISTANT to contamination and ageing (from carbonation, penetration of chlorides, corrosion and damaging salts – in all weather conditions).
  • PROTECT THE ENVIRONMENT as it is a 100% acrylic water-based product.
  • PROTECT from penetrating damp.

Preparation
Remove loose or flaking material. Make sure the surface is. clean (no dirt or grease) and dry. Seal: If new, bare and absorbent surface, seal with this product, thinned 10% with water.

Paint
Stir to ensure paint is completely mixed. Dry: Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp or humid conditions or extreme temperatures. TIP: if the colour change is strong, more coats may be required.

Clean
Remove paint from the brush or roller with a cloth and then wash with water Store: Store the paint in dry conditions and protect from any extreme temperatures.