UPS SERVICE
Shipping & Returns
Be the first to know about New product launches, Free Product samples, New reward points store and much much more...
Fast & Free Technical Phone Advise 01484 428526 MON- FRI 9-4PM
Shipping & Returns
Find retail locations
For orders above €100
For All Your Questions
Shipping & Returns
Find retail locations
For orders above £50
For All Your Questions
Products Made Fresh On Order 🏭
Free Shipping Over £50 📦
Climate Positive Products 🌎
Scientifically Tested & Proven Products 🧪
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
A water-based primer specially formulated to seal unstable areas that remain powdery and chalky after the surface has been thoroughly prepared for painting with PRO S-FLEX/T-FLEX. The product is great for preparing old walls prior to re-skimming and can be applied brick, stone, render, concrete, plaster, pebbledash, stucco, existing painted surfaces friable surfaces prior to overcoating, etc. To get the best results make sure surfaces to be sealed are sound, clean, and dry.
Can be applied on: Brick, stone, render, concrete, plaster, pebble dash, stucco, and existing painted surfaces prior to over-coating.
Trusted Across The Globe For Over 25 Years By Major Companies And Industries: This one of a kind technology is patent protected and has been applied on more than ten million square feet across the world including major hotels, apartment buildings & aircraft hangers. used & trusted by top major companies around the world including Coca Cola, Rolls Royce, Holiday Inn, IKEA and many more blue chips
When a 1% reduction in the thermostat results in up to a 10 percent energy-saving. Thermilate PRO Range brings a revolutionary breakthrough low-cost decorating solution to all properties.
Encouraging all homeowners to take advantage of decorating with high-quality products and insulating their property by simply painting with Thermilate products, lower your carbon footprint and reduce your energy costs which helps pay for itself.
Pro Interior/Exterior Paint approximately covers 12-16 per 1 coat, 6 - 8 per litre per 2 coats. Depending on the colour and porosity of the surface.
Can be used in all homes and commercial properties including Residential, Spas, Gyms, Schools, Universities, Hospitals and many more.
Touch Dry: 2 h
Re-coatable: 4 h
IMPORTANT: Ensure you have enough paint in one batch, if you are using more than one container please ensure you mix the two containers in a single bucket to ensure colour consistency. (Due to batch variations)
Depending on the surface and the colour being painted 1 or more coats may be required. Allow 4- 6 hours in-between coats. The product is easy to apply - brush, roller or spray.
Whether you’re painting your Interior, Exterior or furniture. The surface preparation remains the same.
To get the best adhesion & results from Thermilate Paint, you need to get your surface ready in 3 Short Steps.
If your painting on pre-painted surfaces, Ensure your surfaces are dry, & have been cleaned and if there's any rough patches surfaces must be repaired and sanded.
(If your painting on fresh plaster please apply a base-coat or a primer before painting, thinning this paint with 50% water will allow a thin layer to be used as a base/mist coat) (use primer on wood & metal surfaces.)
Ensure your wall cracks are filled and repaired to minimise risk of damp.
Ensure your wall or surface is fully dried, dust-free, and condensation-free with no flaking paints.
(NOTE: MOULD, Condensation and Damp problems only grow back when the root issue of the problem is not solved. Mainly caused by bad ventilation & water ingress)
Heres Quick, Full guide for homeowners & painters like you on how prepare your surfaces like a pro, in no time… Click Here
https://www.paintoutlet.co.uk/pages/surface-preparation
Once your surface is prepared, you're ready to paint!
Very Easy-to-Apply: You can use Brush, Roller or Airless Sprayer on all Interior and Exterior walls & rooms, including all concrete surfaces such as slabs, block paving, tarmac and all brick and masonry surfaces.
(NOTE: All surfaces must be clean, dry and free from grease/dirt before painting.)
Use primer if required and this should be used on most unpainted surfaces. OR If you are going to paint on absorbent surfaces like fresh plaster, bricks, stone and or concrete surfaces, you can make a mist coat by mixing your first coat with 50% water.
(This product is also suitable to be used on wood (wood surfaces must be sanded for a smooth finish) & metal surfaces and Furniture with a good quality primer OR HQC universal primer.)
All orders made fresh on order and shipped directly from our uk based factory.
We take pride in providing fast and efficient shipping services, with a typical delivery time ranging between 24-48 hours. Our shipments are fully tracked, so you can monitor the progress of your order from the moment it leaves our factory to the time it arrives at your doorstep.
Please note that the shipping time may vary depending on the time of day when you place your order and when it is shipped.
We do our best to send out orders for next day delivery, but in some cases, this may not be possible. We use a 24 hour next day shipping courier but guarantee a 48-hour delivery, unless we have contacted you to arrange an alternative.
Please note that some tester/sample pots are sent via Royal Mail and may take a few days to arrive.
Delivery Charges:
Deliveries to UK Mainland are FREE of charge on orders above £50. For orders below this amount, Premium & Tracked shipping costs £6.95. Shipping for colour tester pots or pouches are FREE.
If you would like to reqest any special shipping options for example: delivery before 12 noon, before 10am or a Saturday delivery, please call our office (0330 330 9824) for a quote for the additional charge if necessary. Deliveries to Channel Islands cost £8.00 per parcel.
Worldwide Delivery:
Please call or email our office for a bespoke quote based on your individual requirements.
Delivery Schedule:
Deliveries take place Monday - Friday from 8am to 6pm (excluding bank holidays), unless a Saturday delivery has been selected. Saturday deliveries are between 8am and 1pm. We cannot specify a particular delivery time unless you have requested a before 12 noon or before 10am service. Please note that we do not deliver on Sundays.
Order Inspection and Claims:
We kindly ask you to check your order carefully as soon as it has been delivered and inform us of any missing, wrong, or damaged items within 24 hours of receipt. We cannot support a claim to our couriers after this time. Please ensure that you store the items you have ordered in accordance with the manufacturer's instructions.
PRO Stabilising Primer approximately covers 12-16 per 1 coat, 6 - 8 per litre per 2 coats. Depending on the colour and porosity of the surface.
Can be used in all homes and commercial properties including Residential, Spas, Gyms, Schools, Universities, Hospitals and many more.
Touch Dry: 2 h
Re-coatable: 4 h
IMPORTANT: Ensure you have enough paint in one batch, if you are using more than one container please ensure you mix the two containers in a single bucket to ensure colour consistency. (Due to batch variations)
Depending on the surface and the colour being painted 1 or more coats may be required. Allow 4- 6 hours in-between coats. The product is easy to apply - brush, roller or spray.
Reading the following information below will help you understand how to prepare all surfaces to be painted like a pro.
Whether you’re painting your Interior, Exterior or furniture. The surface preparation remains the same.
To get the best adhesion & results from Thermilate PRO Stabilising Primer, you need to get your surface ready in 3 Short Steps.
If your painting on pre-painted surfaces, Ensure your surfaces are dry, & have been cleaned and if there's any rough patches surfaces must be repaired and sanded.
(If your painting on fresh plaster please apply a base-coat or a primer before painting, thinning this paint with 50% water will allow a thin layer to be used as a base/mist coat) (use primer on wood & metal surfaces.)
Ensure your wall cracks are filled and repaired to minimise risk of damp.
Ensure your wall or surface is fully dried, dust-free, and condensation-free with no flaking paints.
(NOTE: MOULD, Condensation and Damp problems only grow back when the root issue of the problem is not solved. Mainly caused by bad ventilation & water ingress)
Heres Quick, Full guide for homeowners & painters like you on how prepare your surfaces like a pro, in no time… Click Here
https://www.paintoutlet.co.uk/pages/surface-preparation
Once your surface is prepared, you're ready to paint!
Very Easy-to-Apply: You can use Brush, Roller or Airless Sprayer on all Interior and Exterior walls & rooms, including all concrete surfaces such as slabs, block paving, tarmac and all brick and masonry surfaces.
(NOTE: All surfaces must be clean, dry and free from grease/dirt before painting.)
Use primer if required and this should be used on most unpainted surfaces. OR If you are going to paint on absorbent surfaces like fresh plaster, bricks, stone and or concrete surfaces, you can make a mist coat by mixing your first coat with 50% water.
(This product is also suitable to be used on wood (wood surfaces must be sanded for a smooth finish) & metal surfaces and Furniture with a good quality primer OR HQC universal primer.)
Free delivery over £50 to members
Sign up for free shipping, Discount and product aamples
Satisfied or refunded
30 day money-back guarantee
Fully Experienced Support Team
Call 0330 330 9824 Monday to Friday during 9AM - 5PM
Secure payments
Check our securely with Paypal, Apple Pay And other major merchants
Item | Price | Qty | Total | |
---|---|---|---|---|
Subtotal |
$0.00 |
|||
Shipping | ||||
Total |