The time it was on the market, speaks for the product itself. It eliminates mould of damp areas and prevents in future, it won’t happen again. It is a long term solution, which offers premium quality, very low odour levels, and maximum performance, you can be assured HQC Anti Condensation Insulating Paint will prevent future condensation problems including mould, blistering paint, discolouration, staining and peeling wallpaper – with just 2 coats. It also reduces heat loss.
HQC Anti Condensation coating is the perfect answer for applications requiring long-lasting protection from continuous and severe condensation. Use in kitchens and bathrooms in homes, hotels, schools, universities, restaurants, service stations, gyms, swimming pools and spas. Paint can easily be applied by brush, roller or spray. Use the product in just the same areas as conventional emulsions.
TOP BENEFITS: 🌟
- Reduces severe condensation problems
- Reduces room heat loss & increases comfort
- Helps prevent unsightly toxic mould
- Lowest cost wall & ceiling insulation
- Eliminates damp and works as long term solution
- Utilising the only genuine insulation additives in the world
Used on luxury and commercial properties, now available to everyone
Very Easy to apply, Trade quality for all homeowners
Scientifically Tested & Proven in top laboratories worldwide & government bodies
TOP FEATURES: ✅
Never worry about condensation again. This HQC Insulating Paint is all you need to keep your place safe and healthy all the time. Use it on your rooms, under wallpaper and keep mould and condensation away!
-
The Ultimate Ultra Protection For Your Home: Formulated with the highest quality acrylic resin to provide ULTRA protection & durability for your property. Combined with unrivalled condensation technology this products creates a ALL-IN-ONE solution when is comes to painting and protecting your spaces
-
Extreme Safe Guard From Mould & Condensation : No more condensation – no moulds, damp stains or peeling wallpaper. Stops blistering paint or discolouration with just 2 coats. With Unbeatable breathability, this product will prevent water from penetrating the wall surface whilst still allowing water vapour to pass. this allows any water residue to evaporate and climate risks of Damp, Mould & condensation
-
Extremely Hardwearing & High Scrub Resistance: Scuff & Scrub Resistance helps protect the most high-traffic areas, surface and rooms. This product is specialised to not only colour your walls but PROTECT them, Expect long-lasting and extreme durable features.
-
Insulating & Energy Saving At No Extra Cost: Simply apply this paint will help prevent heat loss though your walls once dried. Insulating properties will help reflect heat back in your room rather than letting it escape. Alternatively in summer, the same technology will prevent heat gain & deflect warm air from entering your rooms and getting too warm. Helping you save money all year round.
-
Simple & Easy To Use For Everyone: Surface must be clean before applying. It is perfect option for a DIY project or just for your own surfaces. follow instructions before on how to paint & prepare your surfaces like a pro below.
Colours available in:
Black, White, Brown, Leaf Brown, Light Grey, Classic Grey, Dove Grey, Duck Egg, Light Blue, Pale Blue, Marina Blue, Ivory, Baby Pink, Racing Green, Sage Green, Terracotta, Sandstone, Light Beige, Bagels, Magnolia, Red Brick/ Rich Red/ Rustic Red, Pine Forest/ The Garden/ Waterfall
Whats the Coverage?
This product approximately covers 12-16 per 1 coat, 6 - 8 per litre per 2 coats. Depending on the colour and porosity of the surface.
Can be used in all homes and commercial properties including Residential, Spas, Gyms, Schools, Universities, Hospitals and many more.
Drying Time: (Note: drying times, depends on the climate conditions when painting)
Touch Dry: 2 h
Re-coatable: 4 h
IMPORTANT: Ensure you have enough paint in one batch, if you are using more than one container please ensure you mix the two containers in a single bucket to ensure colour consistency. (Due to batch variations)
Depending on the surface and the colour being painted 1 or more coats may be required. Allow 4- 6 hours in-between coats. The product is easy to apply - brush, roller or spray.
Reading the following information below will help you understand how to paint & Prepare all surfaces like a pro.
SURFACE PREPARATION - BEFORE APPLICATION: 🏡
Whether you’re painting your Interior, Exterior or furniture. The surface preparation remains the same.
To get the best adhesion & results from HQC Paint, you need to get your surface ready in 3 Short Steps.
It's critical to achieve perfect results.
Step 1):
If your painting on pre-painted surfaces, Ensure your surfaces are dry, & have been cleaned and if there's any rough patches surfaces must be repaired and sanded.
(If your painting on fresh plaster please apply a base-coat or a primer before painting, thinning this paint with 50% water will allow a thin layer to be used as a base/mist coat) (use primer on wood & metal surfaces.)
Step 2):
Ensure your wall cracks are filled and repaired to minimise risk of damp.
Step 3):
Ensure your wall or surface is fully dried, dust-free, and condensation-free with no flaking paints.
(NOTE: MOULD, Condensation and Damp problems only grow back when the root issue of the problem is not solved. Mainly caused by bad ventilation & water ingress)
Heres Quick, Full guide for homeowners & painters like you on how prepare your surfaces like a pro, in no time… Click Here
https://www.paintoutlet.co.uk/pages/surface-preparation
HOW TO USE YOUR PAINT: 🎨
Once your surface is prepared, you're ready to paint!
Very Easy-to-Apply: You can use Brush, Roller or Airless Sprayer on all Interior and Exterior walls & rooms, including all concrete surfaces such as slabs, block paving, tarmac and all brick and masonry surfaces.
(NOTE: All surfaces must be clean, dry and free from grease/dirt before painting.)
Common Questions:
Should i use a primer before painting?
Use primer if required and this should be used on most unpainted surfaces. OR If you are going to paint on absorbent surfaces like fresh plaster, bricks, stone and or concrete surfaces, you can make a mist coat by mixing your first coat with 50% water.
Can i use this on Wood or metal?
(This product is also suitable to be used on wood (wood surfaces must be sanded for a smooth finish) & metal surfaces and Furniture with a good quality primer OR HQC universal primer.)
